PowerTap P1S Single Sided Power Meter Pedals

BRINGING POWER TO THE PEDALS FOR THE PEOPLE

Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart.

Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal.

Features:

• Single-sided measurement.
• An affordable way to measure power at the pedals.
• Doubles left pedal measurement to calculate total power.
• Easily swap between bikes for a vast range of compatibility.

Specifications:

• Weight: 426 grams per pair of pedals (with batteries)
• Thread Type: 9/16"
• Cleat Interface: 3 bolt
• Cleat: Red, 6 degree floating
• Spring Type: Adjustable Elastomer (*Adjust the spring force tension for optimal retention and safe release. Ensure pedal and claw area are free of dirt, debris and clothing obstructions.)
• Proven PowerTap accuracy
• Release Tension: 6-20 Nm
• Stack Height: 14mm
• Center of Pedal: 53mm (measured from crank to pedal)
• Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank)
• Firmware Updates: Over the air
• Connectivity: ANT+ and Bluetooth SMART
• Battery: AAA Lithium - use only lithium batteries with the P1 pedals. Alkaline batteries could damage the pedals, and damage caused by batteries is not covered under warranty.
• Battery Life: 60 hours
• No weight limit
• PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual sided P1 pedals.